This fan is equipped with a pull cord switch.
Technical specifications
| Parameter < /td> | Value |
| Voltage, V | 220 |
| Maximum power consumption, W | 18 |
| Performance, m3/h | 98 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 < /td> |
| Noise level at a distance of 3 m, dB(A) | 34 |
| Weight, kg | 0.65 |
| Protection, class | IP24 | Pipe size, mm < /td> | 100 |
Drawing and sizes
| Dimensions | ?D | B | B1 | B2 | H | L | L1 |
|---|---|---|---|---|---|---|---|
| mm | 100 | 165 | 150 | 150 | 150 | 92 | 32 |
Connection diagram
Connection diagram of a fan with a built-in switch to the network
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises .
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- For installation with air ducts of 100, 125 and 150 mm.
Design
- Modern design and aesthetic appearance.
- The housing and impeller are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- The fan is equipped with a device that ensures smooth opening and closing of automatic shutters that prevent reverse traction.
- Protection class IP 24.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- The fan is controlled via a built-in cord switch “B”. When the fan is mounted on the ceiling, this option is not used.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
- Using a timer “T” (the built-in adjustable shutdown delay timer allows the fan to operate for 2 to 30 minutes after it is stopped by the switch). li>
- Using a humidity sensor and a timer “ТН” (if the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and continue operating until the humidity will return to normal, then the fan works out the time set on the timer and turns off).
- Using a motion sensor and timer “TR” (if the sensor detects movement in its area of action, then the fan will automatically turn on and continue working on a timer from 2 to 30 minutes Detection range up to 4 meters (detection angle max. 100°).
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
- Shortened pipe 92 mm long . For convenient installation in walls and ceilings up to 100 mm thick.
Installation example
MA series fan passport
