Vents TT 200* is a fan built into a 200 mm duct in a plastic casing.
Vents TT fans combine broad capabilities and high performance of axial and centrifugal fans. They are used in supply and exhaust ventilation systems that require high pressure, powerful air flow and low noise levels. Compatible with air ducts with a diameter of 200 mm.
*This product is not produced by the factory, a replacement is available - fan Vents TT PRO 200
Fans are an excellent choice for installation in exhaust systems for rooms with high humidity (bathrooms, kitchens), as well as for ventilation of apartments, cottages, shops, cafes, cinemas, etc. A wide range of models and a large selection of options allows you to choose a fan that meets your requirements.
Fan specifications
| Parameter | Value | |
| min | max | |
| Voltage, V | 230 | |
| Current frequency, Hz | 50 | |
| Power consumption, W | 90 | 125 |
| Performance, m3/h | 830 | 1040 |
| Current, A | 0.4 | 0.55 |
| Rotation speed, min-1 | 2045 | 2510 |
| Noise level at a distance of 3 m, dB(A) | 45 | 52 |
| Maximum temperature of transported air, C | 60 | |
| Weight, kg | 6.4 | |
| Protection, class | < td style='text-align: center,' colspan='2'>IPХ4 ||
| Pipe size, mm | 200 |
Overall dimensions of the Vents TT 200 fan
| Dimensions | ?D | ?D1 | В | N | L |
| mm | 199 | 209 | 239 | 261 | 295 |
Aerodynamic characteristics diagram 
Design
Vents TT 200 fan casings are made of high-quality and highly durable materials: ABS plastic (100 -200) and low-flammability polypropylene (250-315). The motor block with impeller and terminal box is attached to the fan housing using special snap-on clamps designed in such a way that its dismantling can be easily done without special skills and tools. This design greatly simplifies fan maintenance.
All models can be equipped with an adjustable timer with a fan shutdown delay range from 2 to 30 minutes (TT&hellip,T). For more convenient connection and use, the fan can be equipped with a power cord with a plug (TT&hellip,P).
Motor
The single-phase motor on rolling bearings has two speeds. For some standard sizes, an engine version with more powerful characteristics is available (TT&hellip,C). To protect against overload, the fan motors are equipped with thermal fuses. Motor protection class – IPX4.
Speed adjustment
The two-speed motor is controlled using an external speed switch (purchased separately). If it is necessary to smoothly regulate the speed, you can use a thyristor regulator RS-1-300, connecting it to the maximum speed terminal of the motor.
If stepwise speed control is required, then the P2-1-300 regulator is suitable. With its help, you can also, in addition to adjusting the fan performance, simultaneously turn the lighting on or off.
Installation
Fans can be installed at the beginning, middle and end of the air duct system. Installation at any angle relative to the fan axis is allowed. In one system, it is possible to install several fans in parallel (to increase productivity) or in series (to increase operating pressure).
The fan housing is equipped with a flat mounting plate, with which the fan is attached to the wall. Electrical connection and installation must be carried out according to the instructions and wiring diagram indicated on the terminal block. For ease of installation and connection, the mounting box can be installed in any position.
Practical guide to connecting the Vents TT fan to the power supply
Example of installation of the Vents TT fan
Example 1< /strong>: Installing a fan in the bathroom exhaust system
Example 2: Installation of a fan as part of an office exhaust system
Example 3: Installation of two fans in parallel to increase productivity in the exhaust system of a warehouse
Passport
