Fan Vents iFan 100 WiFi

Vents iFan 100 WiFi is a surface-mounted fan and is used for use in exhaust ventilation systems in bathrooms, shower rooms, kitchens and other domestic premises. Intelligent built-in fan control functions allow you to adjust the fan mode depending on the consumer's needs. The thickness of the fan is only 30 mm.

This model is equipped with a WiFi module for controlling all modes from a smartphone.

Technical characteristics of the fan

Fan dimensions

Design features

	Stylish design 3D front panel design fan fits perfectly into the interior of a bathroom or toilet
	Ball bearing motor Easy for service the engine is removed along with the impeller
	Variability of installation Vents fan iFan can be mounted both vertically and horizontally
	Replaceable gearboxes The fan can be mounted with an air duct diameter 100 mm or 125 mm
	Low noise level For silent fan operation Vents iFan is equipped with an impeller of a special aerodynamic shape. The noise level is only 21 dBA.

• The thickness of the fan (front panel) is only 29 mm.
• Built-in switch to turn off the fan during service

Fan motor

• Maintenance-free ball bearings are used
• The fan's energy consumption is only from 1.6 to 6 W
• To absorb vibration, rubber vibration-damping inserts are used on which the motor is installed, which ensures silent operation of the fan
• Built-in motor overheating protection

Control

The fan is controlled using an application on a mobile device. You can download the application by

link to the Play Market or App Store using QR codes.

Operating modes

HUMIDITY MODE / Humidity control settings

The humidity sensor allows you to program operation in three modes

• Sleep - the fan is in standby mode until a signal from the humidity sensor or external switch appears
• Silent - optimal mode for removing moisture, the fan operates in silent mode with a capacity of up to 83 m3/h
• Max - maximum performance mode for removing excess moisture, fan capacity up to 133 m3/h< /li>

TIMER / Control of fan on/off delay time

Three timers available< /p>

• Humidity removal timer - set the fan operating time after reaching the required humidity level - 30, 45 or 60 minutes
• Stop delay timer< /strong> - when the fan is turned on from an external switch, the fan runs for the set time (5, 15 or 30 minutes), after which it returns to the previous mode
• On delay timer - if you often and you briefly visit the room where the fan is installed (for example, a bathroom), then to prevent unnecessary turning on of the fan, you can set the fan to turn on not immediately, but with a delay - 0 minutes, 2 minutes or 5 minutes

< p>

SPEED / Setting the fan speed

Uses smooth adjustment of the fan performance in the range 10 speeds

• Silentmode - from 33 to 72 m3/h
• Maxmode - from 72 to 106 m3/h

24 HOURS / Constant ventilation

The fan operates at minimum performance - 33 m3/h. When the humidity level changes, the fan switches to Max(default) or Silent mode. When receiving a signal from an external switch, it switches to the Silent

mode

Automatic interval ventilation

The fan turns on every 12 hours. It works for 0.5 hours to ventilate the room, after which it turns off.

Examples of fan installation

Video review of the Vents iFan fan

Fan passport

(Instructions in pdf format, will open in a new tab)

Warranty

The warranty period for the product is 60 months (5 years) from the date sale of the product subject to the consumer following the rules of transportation, storage, installation and operation.

Play Market	App Store