The Vents 100 K fan is a fan without sensors. Designed for continuous or periodic exhaust ventilation of domestic premises for private or commercial purposes. The fan is built directly into the ventilation shaft or connected to a small air duct with a cross-section of 100 mm. Since the fan is axial and cannot create high pressure, the length of the air duct should not exceed 1 meter.
Technical characteristics
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| < strong>Maximum power, W | 14 | Capacity, m3/h | 95 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) < /br> | 34 |
| Weight, kg | 0.53 |
| IP34 | |
| Pipe size, mm | 100 < /td> |
Overall dimensions
| Dimensions | ?D | B < /td> | H | L | L1 |
| mm | 100 | 154 < /td> | 110 | 100 | 15 |
Connection diagram
< /h3>
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- For installation with 100 mm air ducts.
Design
- Classic design and aesthetic appearance.
- The housing and impeller are made made of high-quality and durable ABS plastic, UV-resistant.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protective insect net.
- Degree of protection IP 34.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:
- The fan is controlled when using the room light switch. The switch is not included in the delivery.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
Fan passport
