Vents MV 120 Vs plastic ventilation grille is equipped witha branch pipe for 125 air duct, an insect screenand has inclined blinds.
The grille is an overhead one and is used in supply and exhaust ventilation systems. This grille is also used to decorate the openings of ventilation shafts. It consists of two parts - one part is attached to the surface with screws, the second part is snapped onto the seating part. To clean the grille, just use a flat screwdriver to unclip the front part of the grille, wash it and put it back.
Material
The grille is made of plastic, the standard color is white. If you need a different color, check with our managers for the availability of other colors.
How to install the grille
The grille is attached using 4 self-tapping screws into pre-drilled holes with installed dowels.
< h2>Dimensions
| Size | B | L | H |
| mm | 186 | 15 | 142 |
Air flow through the grille
| < strong>Air speed, m/s | |||||
| 0.5 | 1 | 1.5 | 2 | 2.5 | 3 |
| Air flow, m3/h | |||||
| 15 | 30 | 45 | 60 | 75 | 90 |
