Ventoxx Slim Line recuperator, compact housing with additional thermal insulation, high performance with low energy consumption
Ventoxx Slim Line is a decentralized recuperator specially designed for installation in buildings with thin exterior walls, including houses made of SIP-panels and similar structures. Thanks to the use of a metal expansion box with an insulation ring, the unit can be easily installed in partition walls from 150 mm thick, while providing reliable thermal insulation and protection from external influences. The solution completely eliminates the formation of cold bridges, contributing to the preservation of heat and comfort in the room.
The design is based on the proven Ventoxx Comfort system with a German-made ceramic heat exchanger that achieves a recovery efficiency of up to 91%. The model operates in 17 modes and has 5 speeds, providing a flexible air exchange setting depending on the needs. At maximum speed, the unit's performance reaches 68 m³/h, while the noise level does not exceed 41 dB. Power consumption is minimal - up to 2.75 W, which makes operation as economical as possible.
The Ventoxx Twist wall-mounted unit is used to control the recuperator, allowing up to four units to be connected and their synchronized operation to be monitored. The integrated G3 filter reliably protects the room from dust, fine particles and insects. The filter does not need to be replaced and can be easily cleaned by hand - maintenance every three months is recommended.
Advantages of the model:- Suitable for walls from 150 mm thick.
- Compact housing with additional thermal insulation
- High performance with low energy consumption
- Aesthetic universal design for any interior
Features:
. Recovery efficiency: 70-91%
. Temperature range: -20 to +50 °C
. Ventilation volume by speed:
1 - 21 m³/h
2 - 35 m³/h
3 - 50 m³/h
4 - 60 m³/h
5 - 68 m³/h
. Noise level:
1 - 17 dB
2 - 22 dB
3 - 33 dB
4 - 38 dB
5 - 41 dB
. Power consumption: 1.6 - 2.75 watts
. Number of modes: 17
. Number of speeds: 5
. Duct diameter: at least 235 mm
. Protection class: fan IP33, control IP20
. Filtration class: G3
. Placement method: horizontally, in an external wall
. Dimensions:
- Set pipe: from 300 mm, Ø 226 mm
- Inner cover: Ø 240 mm
- Outer cover: 290×280 mm
- Compensation box: 280×290×100 mm
Equipment:
. Plastic shell 300 mm
. Outer metal cover
. Inner cover
. Metal box with insulation ring
. Cartridge with ceramic heat exchanger and fan .
. G3 filter
. External cover fasteners
. Warranty card
. Instructions
Ventoxx Slim Line recuperator is an optimal solution for compact and efficient ventilation in houses with thin walls. You can purchase the model in the Domis.pro online store.
| Main features | ||
| Temperature range | -20 to +50 | |
| High-tech heat exchanger type | High-tech heat accumulator | |
| Product type | Recuperator | |
| Feature specifications | ||
| Diameter, mm | not less than 235 | |
| Number of speeds in reverse | 5 | |
| Maintenance | The filter does not require replacement. The heat accumulator cartridge and filter should be checked for cleaning every 3 months. | |
| Ventilation capacity, m?/h | 1 speed - 21, 2 speed - 35, 3 speed - 50, 4 speed - 60, 5 speed - 68 | |
| Method of placement | horizontal placement in the outer wall | |
| Noise level, dB(A) | 1 speed - 17, 2 speed - 22, 3 speed - 33, 4 speed - 38, 5 speed - 41 | |
| Recuperation efficiency, % | 70-91 | |
| Protection, class | Fan IP 33 Control IP 20 Filter G3 | |
| General characteristics | ||
| Number of modes | 17 | |
| Power consumption, W | 1,6-2,75 | |
| Dimensions, mm | Set tube minimum length - 300 mm, Diameter - 226 mm, Inner lid: Diameter - 240 mm, Outer cover : Height - 290 mm, Width - 280 mm, Compensation box - 280*290*100 |
