Fan Vents VCN 100

Technical characteristics

Dimensions

Charts

Design

The casing made of steel with a polymer coating protects the engine from direct moisture in outdoor conditions installation The lower part of the fan has a protective grille against small birds and rodents. The air is exhausted vertically downwards.

Motor

The single-phase external rotor motor is equipped with a centrifugal impeller with backward curved blades. The engine is equipped with built-in thermal protection with automatic restart. The use of rolling bearings in the engine ensures a long service life (40,000 hours). To achieve precise performance, low noise levels and safe fan operation, each turbine undergoes dynamic balancing during assembly. The motor in the fan has a protection class of IP 44.

Speed adjustment

Smooth or step adjustment is carried out using a thyristor or autotransformer. Several fans can be connected to one control device simultaneously, provided that the total power and operating current do not exceed the rated parameters of the controller.

It is possible to use a speed controller (supplied separately) RS-1-300

Installation

Fan Vents VCN 100 is designed for installation on the outer surface of a wall and connection to a round air duct of the appropriate diameter. Power is supplied to the fan through external terminals. Electrical connection and installation must be carried out in accordance with the instructions and electrical diagram specified in the product passport.

Installation example

Fig.1 .Exhaust ventilation in a bar establishment

Fig.2. Exhaust ventilation in the toilet.

Documentation

Fan passport < /p>